How is the design of a soft board reasonable?

Circuit boards are often used in the production of electronic products, and the purpose of enterprises is to reduce production costs. In which cases should FPC soft board design and construction be used, and in which cases is it not urgent and cost-effective to use soft boards!



During the production process of soft board manufacturers, engineers need to consider many factors, such as reasonable wiring and minimizing production costs. Choosing to assemble a large number of FPC soft boards is a technology, generally FPC cable arrangement and wire connection are suitable for sample and experimental purposes. The cost of FPC soft board mainly depends on the area of the circuit, while for FPC cable and wire, the main cost is the number and length of the wires. When many lines operate in a small area, the FPC soft board wins because of the lower unit connection cost. If only a few lines are connected for a long distance, wires or flat wires are a good choice. If the design engineer is concerned about the assembly cost of mass production, fpc soft boards are a necessary component. If information on product production can be provided and engineering and tool cost control can be carried out in the front-end, soft boards have the opportunity to become low assembly cost technologies. The cost of FPC soft boards will decrease due to increased utilization and design adjustments, and the low cost may come from subsequent factors: 1. FPC soft boards are used for various levels of interconnection: component to component, multi component, and chip to chip. 2. All hardware on the board surface, such as connectors and larger components, can be connected using soft boards. 3. FPC soft boards allow for a large number of terminal designs. 4. FPC soft board design can be used for final electrical properties in advance