FPC flexible circuit board/FPC flexible board

When preparing to use FPC FPC/FPC soft board as the circuit, it is not only necessary to consider the PCB functions of FPC FPC/FPC soft board, but also the functions equivalent to connectors or wires. Therefore, it is necessary to check and discuss the following three points to decide whether to use FPC FPC/FPC FPC.

1、 Price comparison

Although the price of FPC FPC/FPC softboard and RPC is only compared, of course, FPC FPC/FPC softboard is more expensive. However, FPC FPC/FPC softboard can be used to inject connectors, wires, soldering and other processes at the same time, so the labor hours and costs in the assembly process can be omitted, and the total cost may not vary much. Therefore, the cost calculation will vary depending on the product shape, part location, and wiring structure. If we only compare FPC FPC/FPC software board with RPC software board separately, it is true that FPC FPC/FPC software board is more expensive. That is, FPC flexible circuit board/FPC flexible board ≥ RPC

It is known that FPC FPC/FPC FPC can save the cost of connectors and wires. Therefore, this cost can be added to the RPC, but it is still cheaper than FPC FPC FPC FPC. I.e

FPC flexible circuit board/FPC flexible board>RPC+connector+wire

However, if the cost of soldering and assembly engineering saved by FPC FPC/FPC FPC is considered, the cost of the two may be close. If we consider the effects of miniaturization, lightweight and high reliability brought by using FPC FPC/FPC soft board, FPC FPC/FPC soft board is worth using. However, it should be noted that the assembly and processing costs of FPC FPCs/FPCs vary depending on the shape or the device of the part, so it is possible that the cost of FPC FPCs/FPCs is higher, that is

FPC flexible circuit board/FPC soft board+processing fee ≈ RPC connector+wire+processing fee

By comparing the costs listed above, it can be found that the cost of FPC FPC/FPC FPC is likely to be lower. It is not enough to consider the price of FPC FPC/FPC FPC itself.

2、 Functional comparison

In actual use, the price is seldom considered, but the function is mainly considered.

1) First, pay attention to the weight and volume of the machine. If the wiring space is too narrow, RPC wiring is not allowed.

2) If FPC flexible circuit board/FPC flexible board is used for wiring movable parts such as printing head or magnetic head, reliability shall be strictly required.

3、 Comparison of trustworthiness

After using FPC FPC/FPC FPC, the possibility of wrong wiring and poor contact performance is greatly reduced, and the reliability of these aspects is also improved. However, it is difficult to measure the reliability in terms of price, so it is rarely practical to use FPC FPC/FPC FPC for the reason of only improving the reliability. On the other hand, it is difficult to use FPC FPC/FPC soft board in automatic assembly, which must rely on manual operation, so it may cause errors or deficiencies in operation. Generally speaking, using FPC FPC/FPC FPC still has high reliability.